Region

Sports and Entertainment Business Directory << Football and Soccer << CYBEX VR2 Strength Training Equipment Full Line VR 2

CYBEX VR2 Strength Training Equipment Full Line VR 2

CYBEX VR2 Strength Training Equipment Full Line VR 2
Cybex VR2 Pieces Include:
*
Torso Rotation
*
Arm Curl
*
Seated Leg Curl
*
Lat Pulldown
*
Back Extension
*
Ab Crunch
*
Arm Extension
*
Prone Leg Curl
*
Overhead Press
*
Seated Row
*Frame Finish " Shall be made of mechanical quality 11-gauge steel purchased in mill run quantities to assure consistency. " Prior to applying finish, each part shall be put through a multi-stage wash to remove oils and to chemically prepare the surface for maximum adhesion. After the wash, the frames shall be dried and coated with an Electrostatically applied powdercoat finish that shall be applied in powder form and then baked until cured. " The finish shall be textured and very hard, assuring a scratch and chip resistant finish.
*Weight Selection " Weights are to be selected by using a high quality selector pin that penetrates the weight plate and locks in place to reduce any chance of disengaging the pin during use. The pin shall be attached to the weight stack with a plastic lanyard in order that the pin stays with the appropriate machine. All weights shall be selected while the user is in position on/in the machine to allow adjustment of the resistance from the exercise position.
*Weight Stack Configuration " All VR weight stacks shall have 4" x 12" x 1",12pound weights except for the Standing Calf Raise (Product No.4875) which shall have 4" x 18" x 1",20 pound weight plates.
*Increment Weights " All machines using weight stacks shall have a plastisol-covered increment weight weighing half the amount of a weight stack plate. A hanger for the increment weight shall be incorporated into the frame on the machine.
*Weight Plates " Shall be made of solid cold-rolled steel with wrinkle black powder coat finish. " Guide rod holes shall be machined to a tolerance of.006 inches.
*Weight Plate Bushings " Self-aligning low-friction bushings shall surround the guide rods for smooth gliding motion.
*Pulleys " Shall use Dupont Corp. Fiberglass-reinforced nylon material, tensile strength rated at 22,500 PSI with double sealed bearings. " Pulleys shall 4.50 inches in diameter with a cable groove with a depth of.250 inches.

Please use contact form for send message directly to seller. Your message will be sent directly to the recipient and will not be publicly displayed.

Advertisement

Try related keywords

furniture
bamboo chair
bamboo product
ab lounge
chair
bamboo table
outdoor furniture
home furniture
bamboo cabinet
aa battery
abs case
ab scissor
ab chair
bamboo flooring
ab exerciser
More...
Post your product now!

Trade Alert

Tell me about new porducts and suppliers in:
RSS Feeds


See also...